home Home > Products > Raised Floor Accessories

Products

CLASSIFICATION
contact us
  • 0086 519 88351000
  • 0086 519 88358883
  • paulinevitian@icloud.com
  • #1 East Lotus Rd • Jianhu Xinnan Industrial Park Changzhou • Jiangsu 213011 • China
Pedestal for Access Raised Floor
    • Pedestal for Access Raised Floor

Description

An important part of every floor system is its substructure. The pedestals create the access and 

service space beneath the floor. They can be produced in a variety of heights to accommodate 

spaces from 20 mm to 1600 mm high The range is made in-house, from the initial design to final 

product. The high load-bearing capacity and great durability of the steel pedestals are the result of 

many years’ experience; and the unique range of possible combinations is achieved with the standard pedestal. This offers unbeatable flexibility.


Our pedestals are made of high quality steel, they are precise, zinccoated, yellow chromized and 

adjustable. A variety of load classes are available.



Designed for computer rooms, data centers, industrial applications, and heavy rolling load areas.


Allows floors to be built over 24" high.


Panels can be gravity-held in understructure for fast removal and replacement.


Stringers provide lateral resistance to heavy rolling loads and seismic loading.


Seismic force-resistant pedestals are available that limit or eliminate the need for anchors or special 

bracing.

System


The substructure Type 1with individual pedestals is suitable for 

rooms with few building service installations and installation heights 

of 100 to 200 mm. With the lowest pedestals from our range 

combined with our thin panels, it is also possible to install the floors

subsequently in existing buildings with low room heights and an 

installation height of only 60 to 100 mm (clearance height of the 

hollow space approx. 40 to 80 mm).


We install the pedestals in the standard grid of the 600 x 600 mm 

panels. Depending on the construction of the access floor panels, 

the distributed load varies between 10 and 30 kN/m2.


System


The substructure Type 2 with individual pedestals is the standard 

solution for normal installation heights of 200 to 600 mm. This 

system enables the easy acces to the hollow space anytime and 

anywhere. The clearance height of the hollow space of approx. 160 

to 560 mm offers sufficient space for data cables, electric cables, 

cabling, heating pipes, cooling pipes,


Air conditioning channels and the junctions of various cables.


We install the supports in the standard grid of the 600 x 600 mm 

panels. Depending on the construction of the access floor panels, 

the distributed load varies between 10 and 30 kN/m2.


System

The substructure Type 8 is based on a joist system of longitudinal 

and transverse profiles in a 600 x 600 mm grid, which have a 

friction-locked connection to the pedestals via anchor screws. Even without panels the system absorbs tractive and shearing forces. It is suitable for installation heights of 300 to 2000 mm. With various 

profile sizes the bearing capacity or distance between pedestals can be adjusted to the relevant requirements. Pedestals can also be 

placed outside the grid pattern to bridge channels and pipes. 

Depending on the construction of the access floor panels the 

distributed load varies between 15 and 40 kN/m2.


System

The substructure Type 3 is suitable for installation heights of 500 to 800 mm. It consists of individual 

pedestals like Type 5 as well as additional loosely suspended strings. These increase the horizontal 

stability of access floors on which heavy equipment is placed and which are frequently opened for the subsequent installation of cables. A clearance height of approx. 430 to 730 mm offers sufficient space for data cables, electric cables, cabling, heating pipes, cooling pipes, air conditioning channels and

the junctions of various cables.


We install the pedestals in the standard grid of the 600 x 600 mm panels. Depending on the 

construction of the access floor panels, the distributed load varies between 10 and 30 kN/m2.

structure with pedestals as for SAS and bearing stringers 

made of galvanized 1 mm 

thick steel with square 

section/profile 22x22 mm. For heavy duty.

Version with longitudinal and cross beams in grids of 600 x 1200 mm, 

further versions available on 

request.

•Used in low profile floor 

installations

•100mm x 100mm x 2.5mm 

base plate

•Die-cast aluminium head




Tips for ordering:
1) Where will the raised floor be located?
2) What will be placed on the raised floor?
3) What are the loads that will be placed on the raised floor during construction as well as the loads on the floor during occupancy?
4) What is the Finished floor height?
5) What about the quantity?(How many square meters?)


If convenint, please kindly supply the answers for the above questions. In this way, we will know your projects better and make a perfect floor plan for your rooms.


 If your order quantity is large, we can give you a good discount!

Any problems, please email us or call us! We will give you the quickest reply!



BACK
Immediately Consult
Message *
Name *
Phone
Email*
Verification code *
Tag:vitian,accessories,steel pedestal
Other Product
New Product